How Much To Get Intake Valves Cleaned

ane of xx

2.0 TFSI Inlet Manifold Removal, Valve Cleaning & Injector Replacement (Transverse Engine)

Included in this 'How To' guide:

A) Manifold Removal Procedure

B) Cylinder Valve Cleaning C) Injector Removal, Assembly & Replacement D) RS4 Valve Installation Parts Required Tools & Materials



A decent socket ready



T10133 Injector removal tool (Laser equivalent tool 'Part No.5069')



I used a copy of Elsawin, and it was invaluable throughout this process

2 of 20

A) Manifold Removal Procedure

Intake manifold: Assembly Overview

ane - 10 Nm 2 - Hodue southe clamp 3 - 3 Nm 4 - Head bolts, 10 Nm 5 - Shutter (Replace) 6 - Intake manifold 7 - Coupling rod eight - Intake manifold flap motor -V157- with intake manifold flap potentiometer -One thousand336 9 - 7 Nm 10 - to human activityive carbon reservoir eleven - Flexible tube 12 - Southolenoid valve 1 for active carbon filter -N80 xiii - Flexible tube 14 - Double non-return valve 15 - Intake manifold support xvi - 25 Nm 17 - 10 Nm 18 - Bonded prophylactic coachh

three of xx

19 - Throttleastward valve control one thousandechanism -J338 20 - 7 Nm 21 - Oil seal (Replace if damaged) 22 - v Nm 23 - Intake air temperature sender -Thou42 24 - 10 Nm

one) Jack the automobile upwards and safely back up with an beam stand on both sides of the car Remove the engine under tray (Torx bolts) 2) Disconnect fuel pressure sensor on acme of fuel pump (start the motorcar and let idle for 10-xv seconds to lower fuel pressure from pump and rail). I also

used the drain valve on the fuel pump to double check all the pressure had been removed, you'll need to put

some rag under information technology to collect any fuel that is released. iii) Safely disconnect the battery (to avert the fuel pump automatically activating when the drivers door is opened) Remove the engine cover/air filter assembly if you take a standard air intake